Cioscorp Online Installer V 16

PART A: The astonishing installation of HBC: First steps into modding In this part we will install HBC, which is used to run apps from the system menu, using the bannerbomb exploit. Along the way, DVDx will be installed, this will allow the lens to recognize burned DVDs (not play backups, just see they are there). In the end we will install Bootmii, which is a very useful app as we will see next.

Designed for the Nintendo Wii console, cIOSCORP is a package of customized IOS (cIOS) files which are installed to enable the launching of backup game discs from the Wii Disc Channel. This allows you to. DARKCORP (starting at v1.0) is the newest version of cIOSCORP (starting at v4.0). ***There are.

A1) and unrar the contents in the root of your SD card. In the root of the SD card you should have: root: apps root: private root: wad IOS38-64-v3610.wad IOS70-64-v6687 [Patched][FreeTheBug].wad boot.elf Hacks.ini A2)Run to your wii, place the card in the SD slot and navigate to the SD card icon, bottom left, writes SD and has the same shape, can't really miss it. Once you did this, a warning screen about scams should appear, press ok, screen will go black. A disclaimer shall appear, press one to continue.

(note: following my guide you will never get an upside down HBC. If you ever find the HBC upside down, run this installer again and install HBC again) A3)Now three lines should appear: Homebrew channel, which can be installed, DVDx, also can be installed, Bootmii, which possibly will give you an error.

Install Homebrew Channel, DVDX. On bootmii option, select 'prepare SD card'. After it finishes, install it as boot2 (if possible) or as an IOS.

Warning: Bootmii at most cases will give you an error, so it cannot be installed as a boot2. For most of you will be installed as an ios. That is fine. A4)After that you are ready, you have installed all of the above! Now an app can be placed in the apps folder in your SD card and be run by HBC! This has a load of functions: Media players, Emulators, Useful apps and Homebrew games! Browse tham all here, but take care with the ones you dont really understand,as they might ruin your wii!

Most of them are really safe tho. Those who were able to install bootmi as boot2 or even if IOS only install SHOULD BACKUP THEIR NAND RIGHT AWAY!!! If an IOS install, you may be able to use the console buttons to navigate the BootMii options; if not, then you will need a Gamecube controller.

Here is what you should do. BACK UP YOUR NAND (REQUIRED) Making a NAND backup with Bootmii is required, it will recover your Wii from 99.9% of bricks. Use the same SD card you used to install Bootmii and make sure there is at least 530mb free on it. Csi Wealth Management Essentials Pdf. Bootmii is very fussy about what SD cards it uses, so avoid generic ones and try and use a Sandisk or similar. A) Put the SD card into the Wii, if you installed Bootmii as boot2 then it will load, if it is installed as an IOS go to the Homebrew Channel, press 'home' on your wiimote and select 'Launch Bootmii'.

B) Use the power/reset/eject buttons to navigate the Bootmii menu and select the icon with the gears on it. If those buttons don't work then you will have to use a Gamecube controller. C) Now select the icon with a green arrow pointing from the chip to the SD card and follow the on screen instructions. D) In about 10 mins you will have a NAND backup, it is normal to have up to 80 bad blocks so don't worry if you get some. E) Put the SD card into PC and copy the NAND backup somewhere safe, you can now delete it from your card. If you installed Bootmii as boot2 then also copy the Bootmii folder to your PC and either delete or rename it, otherwise it will load every time you switch your Wii on. If ever you get bricked then copy the bootmii folder and NAND backup onto your card, do steps a) & B) again, using Preloader to get to HBC if necessary, then select the icon with the arrow going from the SD card to the chip.

It is not recommended to restore your NAND if you have Bootmii installed as an IOS. Click to expand. The following should get you a cios, so that you can play backups on your wii: >>Those who had previously (before the update) installed ios249 may have a chance to play backed up games easily.

They should run cios38rev14 installer from Homebrew Channel and use ios250. If that does not work, try running it again, but using one of the following: ios202, ios222,ios223,ios249.Then you can proceed to D. If one of these does not work either, you should have to do the following: PART B: The extermination of the evil stub ios249 Ok, so N did this update and those ppl knew that we use ios249 to install our cios and place our backups. What did they do? They invented an empty ios ('stub') and place it in slot 249, to stop us. Like they will!

Here is what we do about it. We will uninstall ios249 stub, and then install our own cios38rev14 in slot 249: B1) or or (start with the first one, if you get an error pick the next one and follow instructions from B2 and on again. One of this should do the trick without an error. B2)Format the SD card, with FAT32, place the contents of the included folder in the SD card root. Only files in SD root should be: root: Wad root: bootmii root: startup.elf root: boot.dol root: 00000001, press A to install the file. -Once it's done, press Home to return to HBC. -Now you can breath.

D7)Installation of priiloader. After you install ios70patched, you are able to install priiloader. -Find the Priiloader app in HBC. -Read the instructions, and hold down B, and press + to use ios249. This will install priiloader.

-Once it is done, reset your wii and it will take you to Priiloader menu. If it does not, switch off, then hold down the reset button and press power to boot. This will take you to priiloader. Make sure that your wiimotes are synced before doing this, or you wont be able to go to system menu (they said they fixed it in 0.3) -From there, go to Hacks and check the ones you want.

Block disc update and Region free ones are recommended. After you are done, go to the Settings and change autoboot to System menu. -Reset the wii.

You are done! If you ever banner brick your Wii (God forbid) you can access priiloader menu by holding down reset button while booting the Wii, then access HBC to undo the brick (yeah i know it rocks). After that you can install all the Wiiware/VC/channel wads you wish, without bricking fear. APPENDIX: To perform an offline installation you must do the following: 1)Get NUSDownloader 2)Run NUSDownloader and download the ioses needed by the app you want to run. For Hermes, I am not too sure which version of ioses 38 37 and 60 are used, so DL all of them to be sure. Mind that you sill need to select the version and not use the 'latest version' option.

3)Make sure you dont check the WAD package option. 4)A folder will be created in the folder NUSdownloader is. Its name should be sth like 0000XXvXXXX. 5)You must copy the contents of the folder in the SD root, but three folders must be created, which should be named after breaking the original folder name like this: root: 0000000X 000000XX vXXXX. And inside the folder the files of the IOS should be placed. EXAMPLE: folder 0 should be in the root like root: 0000025 v3612. • About us Se7enSins caters to all types of gamers across the globe, aiming to provide access to the latest news, releases, mods and a great deal more.

With a diverse range of content and a welcoming, amicable and tight-knit community, Se7enSins is a forum open to anyone and everyone. Please do not hesitate to share the experience. • • • • • • Site Functions • • • • Useful Links • • • • • Support the site Development and day-to-day site maintenance is a service provided by the staff for the members. However, to help fuel the fire, donations go a long way. To provide a better service for everyone, purchasing Premium not only supports the site, but provides for further site progression and grants access to lots of exclusive privileges.

I'm trying to install bootmii. I'm running 3.2U. I tried running the installer (renamed boot.elf) in the HBC. I get to the Warning screen about not purchasing or selling homebrew and it says press 1 to continue (hackmii). My wiimote is NOT lit, and nothing works. I am stuck here. I tried again running it from the preloader (0.29).

Same thing, only the wiimote IS lit. I unplugged ALL USB, GC controllers, GC mem cards, and in the preloader one, I even took out the SD card. The only thing hooked into my wii is the power and the video out. What is going on??? 'So, what did you do? My wiimote is still not recognized at the installer screen, and I have no GC controller.' Here (in Canada) at superstore they are $10.

A friend could lend you one because you only need it one time for installing and can update HBC through the HBC with a wiimote. I'm sure a friend wouldn't mind lending you one for a day. Here I would if I knew you and lived nearby =D. Hope you find one! Edit: Not linking to it is not against the rules right? Just mentioning it like backup loader isos or usb loader issues.

I'm happy to remove it if I am requested. Just let me know and A.S.A.P.

I'll remove it. Autosketch Skd Converter Online. 'So, what did you do? My wiimote is still not recognized at the installer screen, and I have no GC controller.' Here (in Canada) at superstore they are $10.

A friend could lend you one because you only need it one time for installing and can update HBC through the HBC with a wiimote. I'm sure a friend wouldn't mind lending you one for a day. Here I would if I knew you and lived nearby =D. Hope you find one!

Edit: Not linking to it is not against the rules right? Just mentioning it like backup loader isos or usb loader issues. I'm happy to remove it if I am requested. Just let me know and A.S.A.P. I'll remove it.